Case CX490D, Operator'S Manual

Page: 155 / 370

4 - OPERATING INSTRUCTIONS
4 - OPERATING INSTRUCTIONS ###_4_###
Starting the unit
Anti-theft protection
A security function can be set up in order to prevent an undesired usage of the machine, or even the theft of the ma-
chine. The security function locks the display by a password when the machine is started. Furthermore, the security
function limits the machine functionality as the engine is started without entering the password.
The set up of the security function is indicated by a specific icon on the display:
The security function is set up.
To set up the security function and the password, consult the CASE CONSTRUCTION dealer.
NOTICE: Consult the CASE CONSTRUCTION dealer in case of forgotten password.
Activation of the security function
Turning the starter key to OFF position, the option for ac-
tivating the security function is displayed. Press the right
button to activate the security function.
At the next machine start, the request for entering the
password will be displayed.
SMIL14CEX2877AA
1
As the key is turned to ON position, the request for enter-
ing the password is displayed. Enter the password using
the buttons on the cluster as a numeric keypad.
As the password is properly entered, the display is un-
locked, and the machine can be started.
If the password is wrongly entered for 3 times, or if the
engine is started up without entering the password, the
machine goes into an immobilized state:
1. A warning buzzer, and the travel alarm if equipped,
sound continuously.
2. The engine speed is limited to low idle.
3. The swing function is disabled.
4. If any lever or pedal is operated, the engine stops au-
tomatically.
SMIL14CEX2878AA
2
4-1