Case CX145C SR, Operator'S Manual

Page: 136 / 306

4 - OPERATING INSTRUCTIONS
STARTING THE UNIT
Anti-theft protection
To prevent the machine from being stolen it is possible to
use the anti-theft protection, which makes it necessary for
a special code to be entered before the machine can be
operated.
To configure the anti-theft protection, consult your CASE
CONSTRUCTION Dealer.
The effects of the device are:
• The engine runs at idle speed.
• The audible alarm device will sound.
• The engine stops if the machine is handled.
Once the machine has been configured, a special access
code has to be recorded which must be entered whenever
you start the engine.
ATTENTION: Once the code has been recorded, do not
forget it, as it can not be changed without consulting your
CASE CONSTRUCTION Dealer.
Code recording
1. Set the ignition key to the “On” position
2. "Password?" and 4 boxes are displayed on the display
screen.
3RW3PD-003
1
3. - Use the following buttons to record a code.
- Move the cursor to the left with the front glass washer
button
(1) .
- Move the cursor to the right with the working light
button
(2) .
- Increase the value (0, 1, 2, 3...) with the front glass
wiper button
(3) .
- Decrease the value (...3, 2, 1, 0) with the engine idling
select button
(4) .
3RW3PD-004
2
4-4