3 - CONTROLS/INSTRUMENTS
Load handling eyes
WARNING
Equipment failure could cause accident or injury!
Do not use the hook end of the coupler when lifting loads. The sling can come out of the coupler and
the load can fall.
Failure to comply could result in death or serious injury.
W0221A
WARNING
Falling object hazard!
Never weld hooks or lugs on the bottom plate of the bucket for handling operations. The connecting
rod eye is the only authorized attachment point. Always have a bucket installed when using the con-
necting rod eye.
Failure to comply could result in death or serious injury.
W0246A
When lifting loads, the slings and chains must be attached
to the load handling eye on the bucket or on the quick
coupler (if equipped). (Refer to page
4-20
NOTICE:
This load lifting eye will only carry the load indi-
cated in the maximum lift chart. See decal inside the cab.
(Refer to page
2-8
).
CT10D001A
1
ATTENTION:
The quick coupler eye can be used for han-
dling loads up to
10 t
(
22046.23 lb
).
ATTENTION:
This attachment point will only carry the
load indicated in the load handling limits chart. (Refer to
page
4-20
).
CD00H002ZA
2
3-76
Summary of Contents for CX145C SR
