Case CX135SR, Operator'S Manual

Page: 44 / 186

CHAPTER 3 - INSTRUMENTS AND CONTROLS
3-16
Issued 8-04 Bur 6-34551NA
OFFSET BOOM CONTROL PEDAL (IF
EQUIPPED) (CX75SR, CX135SR)
Press the front of the pedal, the offset boom rotates
to the left.
Press the back of the pedal, the offset boom rotates
to the right. Offset angle, see Working ranges in the
Specifications section.
CT02C042 Figure 32
EQUIPMENT OFFSET PIVOT CONTROL
PEDAL (CX80)
Press the front of the pedal, the equipment pivots to
the right.
Press the rear of the pedal, the equipment pivots to
the left. Offset angle, see “Working ranges” in the
Specifications section.
CT02C042 Figure 33
OPTION PEDAL
CT02C043 Figure 34
This pedal is used for options such as hydraulic
breaker, earth auger, etc.
UNLOCKING AND LOCKING OF PEDALS
IMPORTANT: The pedal must be locked into position
shown in figure 35 to have the hydraulics in neutral.
UNLOCKING
Push the locking pin forward.
CT02C044 Figure 35
WARNING: This pedal has to be locked
when the option is not used.