Case CX135SR, Operator'S Manual

Page: 20 / 186

CHAPTER 2 - SAFETY, DECALS, AND HAND SIGNALS
2-8
Issued 8-04 Bur 6-34551NA
•
Check with your local environmental or recycling
center or your dealer for correct disposal
information.
TRANSPORTING PRECAUTIONS
•
Know the rules, laws, and safety equipment
necessary for transporting this machine on a road
or highway.
WHEEL, TIRE, AND TRACK SAFETY
•
Explosive separation of the tire and/or rim parts
can cause injury or death. When tire service is
necessary, have a qualified tire mechanic service
the tire.
ROLL-OVER PROTECTIVE STRUCTURE
•
Do NOT modify the ROPS in any manner.
Unauthorized modifications such as welding,
drilling, cutting, or adding attachments can weaken
the structure and reduce your protection. Replace
ROPS if it is subjected to roll-over or damage. Do
not attempt to repair.
FIRE EXTINGUISHER
It is recommended that you have a fire extinguisher
on your machine. The fire extinguisher shown is
available from your dealer and can be installed on the
machine.
SEAT BELT PRECAUTIONS
CD00E032
Figure 5
1. RIGHT BELT STRAP
2. LATCH MECHANISM
3. RELEASE BUTTON
1. To latch the seat belt, pull the right belt strap from
the retractor.
2. Insert the metal end into the latch mechanism on
the left side of the seat.
3. To unlatch the seat belt, press the red button on
the left side latch mechanism.
4. The seat belt will automatically retract.
M422A
M437
SPECIFIC PRECAUTIONS TO THIS MACHINE
•
Keep the load or tool as low as possible while
moving the machine around the job site.
•
Never smoke while refuelling.
1
2
3
WARNING: Before starting the engine
ensure seat belts are securely fastened. The
seat belt can help insure your safety if it is
used and properly maintained. Never wear a
seat belt loosely or with slack in the belt
system. Never wear the belt in a twisted
condition or pinched between the seat
structural members.
WARNING: Securely fasten your seat belt.
Your machine is equipped with a ROPS cab,
ROPS canopy or ROPS frame for your
protection. The seat belt can help insure your
safety if it is used and maintained. Never
wear a seat belt loosely or with slack in the
belt system. Never wear the belt in a twisted
condition or pinched between the seat
structural members.