4 - OPERATING INSTRUCTIONS
Lowering the attachment in the event of a failure
WARNING
Unexpected machine movement!
Only use the following procedure in case of machine failure. Always use extreme caution during oper-
ations. Keep other persons away from the bucket, attachment, and boom. The bucket or attachment
can move unexpectedly during operations due to weight of the bucket, attachment, arm, or boom.
Failure to comply could result in death or serious injury.
W1364A
CAUTION
Crushing hazard!
Keep away from the space under the bucket or attachment when lowering the bucket or attachment.
In cases where the machine fails and the engine stops, lower the attachment using the procedure
described in this manual.
Failure to comply could result in minor or moderate injury.
C0169A
NOTICE:
the procedure should be completed within five minutes after the engine stops. The accumulator pressure
will gradually falls which will disable the ability to lower the attachment.
If the engine breaks down, use the following procedure to
lower the attachment:
1. Turn the starter key to ON position.
SMIL15CEXY892AB
1
2. Set the gate lock lever
(1)
in forward position.
SMIL15CEXY882AB
2
4-11
Summary of Contents for CX130C
