4 - OPERATING INSTRUCTIONS
Starting the engine
WARNING
Avoid injury!
Before starting the engine, securely fasten the seat belt. The seat belt can help ensure your safety
if it is properly used and maintained. Never wear a seat belt loosely or with slack in the belt system.
Never wear the belt if it is twisted or pinched between the seat structures.
Failure to comply could result in death or serious injury.
W0142A
WARNING
Hazard to bystanders!
Make sure the area surrounding the machine is clear of all persons before starting the engine.
Failure to comply could result in death or serious injury.
W0090A
WARNING
Toxic gas and asphyxiation hazard!
Diesel exhaust contains dangerous compounds. Never operate the engine in a closed building or
area. Proper ventilation is required under all circumstances.
Failure to comply could result in death or serious injury.
W1302A
1. Check that there is no abnormality in the machine.
2. Confirm that the engine hood and the side doors are
closed and locked.
3. Confirm that the gate lock lever is in central position
(the safety bar is in inward position).
4. Set each operation lever in neutral.
5. Securely fasten the seat belt.
SMIL14CEX2592AA
1
6. Confirm that the engine speed throttle
(1)
is in low idle
position.
7. Turn the starter key
(2)
to ON position.
SMIL15CEXY892AB
2
4-3
Summary of Contents for CX130C
