3 - CONTROLS AND INSTRUMENTS
Engine hood
WARNING
Rotating parts!
Shut off the engine before opening the engine hood.
Failure to comply could result in death or serious injury.
W1059A
WARNING
Falling object hazard!
Risk of injury from FALLING ENGINE HOOD. Latch the hood in the fully open position prior to working
within the engine compartment.
Failure to comply could result in death or serious injury.
W1090B
Opening
Unlock the latches with the starter key. Disengage the
latches, and raise the engine hood until it is fixed in the
open position with the stay.
NOTICE:
One of the latches is located on the edge of the
upperframe alongside the right track. Make sure to reach
the latch by grabbing the handrail.
NOTICE:
After fully opening the engine hood, check that
it is fixed firmly.
NOTICE:
Do not open the engine hood during strong
winds.
SMIL17CEX0146AA
1
Closing
Raise a little the engine hood in order to unlock the stay.
Handle the stay to lead it into the guide, and then gen-
tly lower the hood. As the hood is closed, engage the
latches firmly, and lock them with the starter key.
NOTICE:
One of the latches is located on the edge of
the upperframe alongside the right track. Make sure to
reach the latch by grabbing the handrail.
SMIL17CEX0147AA
2
3-59
Summary of Contents for CX130C
