Case 580ST, Operator'S Manual

Page: 305 / 434

7 - MAINTENANCE
Front and rear axle
1. Move the machine to a level and firm ground.
2. Lower the loader attachment to the ground.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
neutral position.
5. Immobilize the machine with the parking brake.
6. Stop the engine and remove the starter switch key.
LEEN11T0362AA
1
Front axle differential oil change - Four-Wheel Drive (4WD)
2WS
1. Place a container with suitable capacity under the plug
(1) .
2. Unscrew and remove the plugs (1) and (2) .
3. Wait for the oil to come out of the axle through the hole
of the plug (1) .
4. After drain is complete, screw in the plug (1) .
5. Fill with clean oil through the hole of the plug (2) until
the level reaches the hole.
6. Retighten the plug (2) .
LEEN11T0375AA
2
Oil specification and capacities
Use CASE AKCELA TRANSAXLE FLUID 80W-140 (
MAT 3510 ) or an oil meeting the below standard:
•
SAE 80W-140
NOTE: T
UTELA
T
RANSAXLE FLUID
SAE 80W-140 can also
be used.
Capacities:
• Front axle differential:
8.6 L ( 2.27 US gal )
7-83