Case 570NXT, Operator'S Manual, Page: 90 / 280

4 - OPERATING INSTRUCTIONS
STARTING THE UNIT
Before starting the engine
WARNING
Inhalation/asphyxiation hazard!
Make sure there is proper ventilation before starting the engine.
Failure to comply could result in death or serious injury.
W0091A
WARNING
Hazard to bystanders!
Make sure the area surrounding the machine is clear of all persons before starting the engine.
Failure to comply could result in death or serious injury.
W0090A
WARNING
Unexpected machine movement!
Before starting the engine, be sure all controls are in neutral or disengaged. This prevents the acci-
dental start up of power-driven equipment.
Failure to comply could result in death or serious injury.
W0169A
Starting for the first time
Before you start the engine for the first time:
• Make sure the machine is properly lubricated and greased. Refer to the maintenance section of this manual.
• Check the engine oil level, engine coolant level, and transmission oil. Refer to the maintenance section of this
manual.
• Check that the machine fuel tank is filled with clean fuel that meets the specifications provided in this manual.
• Remove any water or sediment from the water in fuel separator.
• Check the tire air pressure and the wheel bolt torque.
At the start of each day
• Adjust the position of the seat so that all controls may be moved through their entire range of motion.
• Fasten the seat belt.
• In the loader operation position, confirm that you are able to push the brake pedals all the way to the end of pedal
action, while sitting with the seat belt fastened.
4-2