Case 570NXT, Operator'S Manual, Page: 38 / 280

2 - SAFETY INFORMATION
Safety rules - Seat belt
WARNING
Roll-over hazard!
Securely fasten the seat belt. Your machine is equipped with a Roll-Over Protective Structure (ROPS)
cab, ROPS canopy, or ROPS frame for your protection. The seat belt can help ensure your safety if it
is properly used and maintained. Never wear a seat belt loosely or with slack in the belt system.
Failure to comply could result in death or serious injury.
W0143A
Seat belts must be worn at all times.
• Keep seat belts in good condition.
• Keep sharp edges and items that can cause damage away from the belts.
• Periodically check belts, buckles, retractors, tethers, slack take-up system, and mounting bolts for damage.
• Replace all parts that have damage or wear.
• Replace belts that have cuts that can make the belt weak.
• Check that bolts are tight on the seat bracket or mounting.
• If belt is attached to seat, make sure seat or seat brackets are mounted securely.
• Keep seat belts clean and dry.
• Clean belts only with soap solution and warm water.
• Do not use bleach or dye on the belts, because this can make the belts weak.
Fasten/release
1. Pull the right-hand belt strap from the retractor.
2. Insert the metal end (1) into the latch mechanism (2)
of the left-hand side of the seat.
3. To release, press the red button (3) on the latch mech-
anism. The seat belt will automatically retract.
RAPH12UTL0196AA
1
2-14