
2 - SAFETY INFORMATION
Safety rules - General
Understand that your safety and the safety of other workers or bystanders is measured by how you service and oper-
ate this machine. Know the positions and operation of all controls before you try to operate. CHECK ALL CONTROLS
IN A SAFE AREA BEFORE STARTING YOUR WORK.
READ THIS MANUAL COMPLETELY and make sure you understand the controls. All equipment has a limit. Make
sure you understand the speed, brakes, steering, stability, and load characteristics of this machine before you start
to operate.
Most accidents involving machine operation and maintenance can be avoided by following basic safety rules and
precautions. Read and understand all the safety messages in this manual, the safety manual and the safety signs on
the machine before you operate or service the machine. See your dealer if you have any questions.
The safety information given in this manual does not replace safety codes, insurance needs, or federal, state, and
local laws. Make sure your machine has the correct equipment according to these rules or laws.
CNH America LLC is continuing to work for your safety by making a tractor loader with better protection and by pro-
viding rules for safe operation.
• Do not rush. Walk, do not run.
• Dirty or slippery steps, ladders, walkways, and plat-
forms can cause falls. Make sure these surfaces re-
main clean and clear of debris.
• Wear protective equipment when appropriate. Hard
hats, protective glasses, protective shoes, gloves, re-
flector type vests, respirators, and ear protection are
examples of equipment that may be required.
• Certain protective equipment should be replaced and
renewed upon age and wear. Old hard hats may not
afford the original user's intention. Faded and soiled
vest are no longer as highly visible as original intent.
See the manufacture’s recommendation.
• Wear the seat belt to maximize the protection capabil-
ity of the cab or Roll Over Protective Structure (ROPS).
Inspect the mounting bolts for the seat belt and the
ROPS, if equipped, on a daily basis to ensure their in-
tegrity.
• Do not permit riders on the machine or attachments.
• Remove all loose objects stored in the machine. Re-
move all objects which do not belong in or on the ma-
chine and its equipment.
• Do not operate this machine or perform maintenance
work if you have not had appropriate training, and read
and fully understand the instructions and warnings in
this manual.
Safety rules - Air conditioning system
• The air conditioning system is under high pressure. Do
not disconnect any lines. The release of high pressure
can cause serious injury.
• Only a trained service technician shall service, repair,
or recharge the air condition system.
• Always wear safety protection when working around
the liquid refrigerant. The refrigerant can cause seri-
ous injury to eyes and skin.
2-3
Summary of Contents for 570NXT
