Case 570NXT, Operator'S Manual, Page: 122 / 280

6 - WORKING OPERATIONS
Comfort steer (if equipped)
WARNING
Loss of control hazard!
Quick response steering (Comfort Steer) may adversely affect machine stability under some operating
conditions. Operate the machine in a safe, open area until you are accustomed to the faster steering
response.
Failure to comply could result in death or serious injury.
W0145A
With normal steering, the operator must turn the steering wheel three full turns to move the wheels, full left to right or
right to left, lock to lock. Comfort Steer requires slightly less than one and a half turns of the steering wheel for the
same lock-to-lock movement.
Use Comfort Steer for cyclic loader work to reduce operator fatigue.
1. Start up the machine.
2. Place the machine in 1st or 2nd gear.
NOTE: Comfort Steer is not available in 3rd or 4th
gear.
3. Press the emblem end of the rocker switch all the way.
The switch springs back to center and the emblem
illuminates.
4. Press the opposite end all the way to disengage. The
emblem no longer illuminates.
NOTE: Comfort Steer automatically disengages if the
key switch is placed in the OFF position, the machine
loses electrical power, or the operator places the ma-
chine in 3rd or 4th gear.
RAPH12UTL0019AA
1
6-14