Case 445/M2, Service Manual

Page: 76 / 178

Figure 115
Figure 116
76148
-
Disconnect lubrication pipes (1) from feed pump.
- Disassemble the injectors and remove them from their
slot: remove the gaskets.
Figure 117
76132
-
Disconnect the pipelines (1) and (2) that provide feed
and fuel recovery between pump and injectors; screw
out the nuts fixing the pipes to the pumping elements;
loosen the fuel recovery pipe collar on the injection
pump; operate on the nuts assembled to the injectors
and loosen the screws fixing the fuel recovery pipeline.
76138
-
Loosen the screws (1, Figure 116) and (1, Figure 117)
holding the fixing brackets of such pipelines; pipe the
pipeline ends.
76150
Figure 118
SECTION 3 − DUTY − INDUSTRIAL APPLICATION
42
E NG I NE S
ED. FEBUARY 2003
zs