DISTRIBUTION SYSTEMS - LIGHTING SYSTEM
Rear work light Electrical light - Testing (A.40.A.17.85 - G.40.A.20)
435, 445, 445CT
NOTE:
For wiring diagram refer to
Wiring harness - Electrical schematic frame 07 (A.30.A.88 - C.20.E.07)
N°
Test Point
Expected Result
Other Result (Possible Cause)
1 Terminal for wire 178L (B) to ground. Continuity
Bad ground circuit.
2 Bulb
Good
Bad bulb.
3 Turn the key switch to the ON
position. Push and release the
work lamp button on the instrument
cluster.
Terminal for wire 784 to ground.
12 volts
Check the circuit between the rear
work lamp and the light relay No. 2.
Also, check light relay No. 1.
Also check the instrument cluster.
1 04/05/2005
A.40.A / 7
Summary of Contents for 435
