Case 1021F, Operator'S Manual

Page: 270 / 366

7 - MAINTENANCE
Engine coolant [60636683]
WARNING
Burn hazard!
Hot coolant can spray and scald if you remove the radiator or deaeration tank cap while the system
is hot. To remove the cap: allow the system to cool, turn the cap to the first notch, and wait for all
pressure to release. Remove the cap only after all pressure has released.
Failure to comply could result in death or serious injury.
W0367A
WARNING
Rotating parts!
The engine is running. Keep clear of rotating fans and belts.
Failure to comply could result in death or serious injury.
W0275A
Drain, flush and replace the engine coolant every 2000 hours of operation or each year, whichever occurs first. Clean
the system and replace the coolant if it becomes dirty or is rust colored.
Service specifications
1021F Capacity 56.8 l ( 15.0 US gal )
1121F Capacity 56.8 l ( 15.0 US gal )
1. After the engine has cooled and the temperature of the
coolant has reached a safe level, remove the cap.
RCPH11WHL264AAH
1
2. With a suitable container of the proper capacity under
the drain, open the cap by turning counterclockwise
and drain the coolant from the system.
3. After all the coolant is drained, secure the drain cap.
4. Use a system cleaning product to clean and flush the
system. Contact your Dealer for system cleaning prod-
ucts.
5. After the system has been cleaned and flushed follow-
ing the cleaning product instructions, close and secure
the drain valve.
RCPH11WHL225AAH
2
7-78