Case 1021F, Operator'S Manual

Page: 221 / 366

7 - MAINTENANCE
Axle cooler filters (if equipped) [60634800]
WARNING
Pressurized hydraulic fluid can penetrate the skin and cause severe injuries.
Hydraulic fluid is under extreme pressure. Rest the bucket or attachment on the ground. Shut the
engine off, turn the key on, and move the hydraulic control lever through all movements several times
to relieve residual pressure in the system.
Failure to comply could result in death or serious injury.
W0161A
WARNING
Pressurized fluid can penetrate the skin and cause severe injuries.
Keep hands and body away from any pressurized leak. DO NOT use your hand to check for leaks. Use
a piece of cardboard or paper. If fluid penetrates the skin, seek medical attention immediately.
Failure to comply could result in death or serious injury.
W0158A
Replace the axle cooler filters when the hour meter registers 100 hours for a new machine during the initial run-in
period. The filters should be changed every 1000 hours thereafter or more frequently when operating conditions are
severe.
Prior operation:
Keep all non-authorized personnel clear of the area. Park the machine on level ground in neutral with the parking
brake applied and the attachment lowered to the ground. Turn the engine off.
1. Install the transport/service link into the lock position.
RCPH11WHL039AAH
1
2. Locate the axle cooler filters on the right side of the
machine under the steps. Remove the cover for easier
access to the filters, if desired.
RCPH11WHL113AAH
2
7-29