Case 1021F, Operator'S Manual

Page: 127 / 366

3 - CONTROLS AND INSTRUMENTS
Switch operations [60631538]
1. Rear wiper switch
A. Push switch to the center position for ON.
B. Push on the front of switch for washer
fluid.
2. Front wiper/washer switch
A. OFF - Toggle switch is in the OFF
position.
B. INTERMITTENT - Push toggle to the
first position. There are six settings for
intermittent wiper speeds.
C. LOW - Push toggle ahead until the wiper
runs continuously for low wiper speed.
D. HIGH - Push toggle ahead for high wiper
speed.
E. WASH - Push down on the front of the
switch for washer fluid.
RCIL10WHL192BAL
1
3. Driving light switch
Push on the top of the switch for roading
machine. Pushing on the bottom of the
switch will turn the lights OFF. The middle
position is for marker/position lights.
4. Work light switch
Push on the top of the switch for front and
rear working lights. The middle position is
for front work lights only. Pushing on the
bottom of the switch will turn the lights OFF.
5. Rotating beacon (optional)
Push on the top of the rotating beacon
switch for the ON position. Push the switch
bottom for the OFF position.
RCPH10WHL194AAH
2
3-61