Case IH Farmall 105U Pro EP, Service Manual

Page: 736 / 1569

Electrical systems - Harnesses and connectors
Fuse and relay box - Identification
NOTICE: Do not replace a blown fuse with another fuse of a different rating.
Fuse and relay box – Cab
SS13A923
1
Fuses
No. Rating Description
F-001 15 A Blower motor left-hand (third speed step)
F-002 10 A
Central Control Unit (CCU) – Permanent battery power supply (keep alive memory)
F-003 15 A Low beam headlights
F-004 15 A Fuel heater
F-005 10 A Transmission Control Unit (TCU) – Battery power supply
F-006 10 A
Electro Hydraulic Remote (EHR) valves, Hydraulic master switch
F-007 20 A Power socket 40 A – Cab outside (switched battery power supply)
F-008 15 A Flasher unit (battery power supply)
F-009 5 A Electronic Draft Control (EDC), Radar sensor
F-010 10 A
Rear Power Take-Off (PTO), Front Power Take-Off (PTO), Four-Wheel Drive (4WD),
Rear axle differential lock, Front axle differential lock, Parking brake
F-011 5 A
Transmission Control Unit (TCU) and rear Power Take-Off (PTO) – Switched battery
power supply
F-012 5 A
Air-conditioning compressor, Cab roof power supply (switched battery power supply),
Main light switch
F-013 15 A Blower motor right-hand (third speed step)
F-014 10 A Transmission Control Unit (TCU) – Switched battery power supply
F-015 15 A
Main beam headlights
F-016 15 A
Engine hood work lights
F-017 7.5 A
Heating control unit
F-018 20 A Blower motor left-hand (fourth speed step)
F-019 5 A Instrument cluster (permanent battery power supply), Diagnostic socket (CAN bus 1)
47735452 03/07/2014
55.2 [55.100] / 7