Case IH Farmall 105U Efficient Power, Service Manual

Page: 37 / 61

Engine - Engine and crankcase
Engine - Install
1. - Refit the flexible belt on the alternator and take up
the slack according to the procedure in
Accessory
belt - Tension adjust belt (55.301) .
2. - Reposition the compressor and the relevant belt
following this procedure:
- Reposition the compressor on the support and with
the relevant pipe support secure it with the screws
- To fit the belt
polyv use the tool 380200011 .
(1) . Compressor clutch actuator drive bracket.
(2) . polyv belt pulley outer edge.
(3) . Tool recess. It is used to drive the tool; this
recess houses the bracket (1) .
(4) . Tail. Used to drive the polyv belt in the pulley
seat.
(5) . Hitching. Thanks to this recess, where the outer
edge (2) is housed, the tool remains hitched to the
compressor.
WLAPL4S10C101C
1
84568025 22/03/2013
10.1 [10.001] / 16