Engine - Engine and crankcase
Engine - Remove
DANGER
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply will result in death or serious injury.
D0076A
1. Remove the engine hood
(1)
, as shown in
Hood - Re-
move (90.100)
.
2. Remove the tank, as described in
Fuel tank - Remove
(10.216)
.
3. Loosen the retaining bolts
(1)
. Remove the front wheel
fenders
(2)
(if any). Do this on both sides.
WLAPL4S10C104A
1
4. Refill the refrigerant of the climate control system
through the fittings
(1)
and
(2)
using the dedicated
recovery, emptying and refilling station. Detach the
two lines by disconnecting any support straps.
MOIL14TR00606AA
2
5. Then detach the lower pipe
(3)
on the condenser
(1)
.
Free the pipe from any straps or clamps. Disconnect
the sensor
(2)
. Place the pipe on the cab.
WLAPL4S10C107A
3
47878246 08/06/2015
10.1 [10.001] / 3
