![CASE CONSTRUCTION CX75C SR Operator'S Manual Download Page 228](http://html1.mh-extra.com/html/case-construction/cx75c-sr/cx75c-sr_operators-manual_2567478228.webp)
6 - MAINTENANCE
Periodic checks
WARNING
Inhalation hazard! Risk to operators and bystanders.
Avoid running the engine in confined areas. Make sure there is adequate ventilation at all times.
Failure to comply could result in death or serious injury.
W0156A
Every month, check:
1.
The battery charge and recharge the batteries if re-
quired.
2.
The levels and top up if necessary.
3.
The condition of all lines, connectors and clamps
(rust). Grease if necessary.
4.
The condition of the paintwork. Apply a coat of anti-
rust treatment where necessary.
5.
Unplug the air filter inlet and the exhaust pipe.
6.
Run the engine at low speed following the starting
up procedure and operate the attachment, swing and
travel controls.
7.
The grease on the cylinder rods.
8.
Plug the air filter inlet and the exhaust pipe.
6-82
Summary of Contents for CX75C SR
