CASE CONSTRUCTION CX37C, Operator'S Manual

Page: 202 / 228

7 - TROUBLESHOOTING
Electrical systems - Troubleshooting
NOTE: this chapter describes the easy diagnostic methods for electrical system-related problems and the remedies
for them. If you cannot find the cause of a problem or solve a problem, consult the CASE CONSTRUCTION dealer.
Problem Possible Cause Correction
Instrument cluster lights
does not glow brightly
even when engine runs at
high speed. Lights flicker
while engine runs Terminals loosened or open circuit See your authorized dealer
Incorrect belt tension Adjust belt tension
Battery charging light
does not go out even
when engine runs at high
speed Damaged alternator See your authorized dealer
Damaged wiring See your authorized dealer
Unusual noise is emitted
from the alternator Damaged alternator See your authorized dealer
Starter motor does not
turn when starter switch
is turned to START Damaged wiring See your authorized dealer
Battery not charged Charge the battery
Damaged starter motor See your authorized dealer
Damaged safety relay See your authorized dealer
The pinion of the starter
motor keeps going in and
out Battery not charged Charge the battery
Damaged safety relay See your authorized dealer
Starter motor turns the
engine sluggishly Battery not charged Charge the battery
Damaged starter motor See your authorized dealer
The starter motor
disengages before the
engine starts up Damaged wiring See your authorized dealer
Battery not charged Charge the battery
The engine oil pressure
light does not appear
when engine is stationary
(when the starter switch
is in ON position) Damaged engine oil pressure switch See your authorized dealer
Damaged instrument cluster See your authorized dealer
Battery charging light
does not appear when
the engine is stationary.
(when the starter switch
is in ON position) Damaged instrument cluster See your authorized dealer
Damaged wiring See your authorized dealer
7-2