Case Communications Mayze 24, Reference Manual, Page: 136 / 166

10.3 Responses
Summary
CFI V.25bis response Call failure indicator
DLC V.25bis response Delayed call message
EOL Additional response End-of-list message after LSD, LSF
or LSN response
INC V.25bis response Incoming call (ring detected)
INV V.25bis response Invalid command entered
LSD
V.25bis response Response to the RLD command
LSF
V.25bis response Response to the RLF command
LSI V.25bis response Response to the RLI command
LSN V.25bis response Response to the RLN command
ONL
Additional response Indicates a connection to a remote
modem
OFL Additional response Indicates a disconnect from line
VAL V.25bis response Valid command entered
Description
CFI Call fail indication. Indicates that the modem has been
unsuccessful in connecting a call. The response includes a two-
letter code which specifies the reason for failure.
NS
Number not in memory
AB Abort call due to timeout
FC Blacklisted call
ET
Number busy
RT Ring tone timeout
NT Tone not detected on line
DT
No dial tone/disconnected
DLC Delayed call message.
DLCx
where x is the number of minutes delay for a blacklisted number.
EOL Indication of the end of an LSD, LSF or LSN listing.
X460-306851 Issue 1 10-4 Rev.0