Case Communications Mayze 24, Reference Manual, Page: 129 / 166

S18 Test Timer
Timer Range: 0-255 (seconds) Default: 0 (manual termination)
This register is used in conjunction with the command &T to cause
tests to run for a set period. The value 0 causes the test to run until it
is manually terminated by the user.
S25 Delay to DTR Timer
Timer Range: 0-255 (seconds) Default: 10 (seconds)
This is used with the
&Q1
and
&Q4
commands.
S36 Maximum Number of Redial Attempts
Counter Range: 0-7 Default: 7
The modem normally makes up to 7 attempts to dial a number. This
number can be changed by entering a new number, within the range
indicated above.
S37 Data Inactivity Timer
Timer Range: 0-60 (minutes) Default: 0
The modem can automatically disconnect calls if no data is
transmitted or received after a specified time, as set by the
*M
command.
S38 Modem Product Code
Counter Range: 0-255 Default: 226 (Standalone)
228 (Rackmount)
This register determines the response to the
I0
command. Different
values may be required for compatibility with some communication
software.
S39 Flow Control XON Character
ASCII Range: 0-127 Default: 17H (ASCII DC1)
This register contains the XON character used in XON/XOFF flow
control (DC1 = Ctrl-Q).
X460-306851 Issue 1 9-5 Rev.0