Case Communications Mayze 24, Reference Manual, Page: 127 / 166

9.3 Non-Bit-Mapped S-Registers
S0 Answer After Specified Number of Rings, or Disable Auto-
answer
Counter Range: 0-255 Default: 2
The number entered in the S0 register determines the number of
times an incoming call signal is received, before the call is answered.
If S0 is set at 0, the autoanswer facility is disabled.
S1 Ring Counter
Counter Range: 0-255 Default: 0
This register records the number of incoming ring signals detected.
It cannot be over-written by the user.
S2 Escape Character
ASCII Range: 0-127 Default: 43H (ASCII
+
)
This register contains the code interpreted as the AT escape
character.
S3 Carriage Return Character
ASCII Range: 0-127 Default: 13H (ASCII CR)
This register contains the code interpreted, and output, as the
carriage return character, when the modem is in command mode.
S4 Line Feed Character
ASCII Range: 0-127 Default: 10H (ASCII LF)
This register contains the code which is output as the line feed
character when the modem is in command mode.
S5 Backspace Character
ASCII Range: 0-127 Default: 8 (ASCII BS)
This register contains the code that is interpreted as the backspace
character when the modem is in command mode.
X460-306851 Issue 1 9-3 Rev.0