Case Communications Mayze 24, Reference Manual, Page: 123 / 166

*Y Break Mode Control
This command is used to determine the manner in which a break
received from the DTE port or the remote modem, is handled.
*Y0
Break immediately passed through the modem.
Default.
*Y1 Break immediately passed through the modem,
and the buffers emptied.
*Y2
Break sent in sequence with the buffered data.
Z Recall User Configuration
This command will recall a previously-configured user
configuration to become the active configuration.
Zn where n is the user configuration number (0-3).
%Z Modify the Remote Configuration
This comand allows you to alter the locally-held copy of the remote
modem's active configuration. Subsequent commands will affect
only this copy, until the
%W command is issued.
''Z
Password Store
This command is used to store an eight-character alphanumeric
password. The modem will return
ERROR if other than eight
characters are entered.
AT''Znnnnnnnn
where
nnnnnnnn
is the password.
Note that passwords are case-sensitive.
See Section 5.9.
X460-306851 Issue 1 8-31 Rev.0