Case Communications Mayze 24, Reference Manual, Page: 117 / 166

/U Asynchronous Format
This command enables you to determine the data format your
modem expects to output or receive when in asynchronous mode.
See
''U for data rate.
/U0 Autobaud for async data format. Default.
/U1 7 data, no parity, 1 stop.
/U2
7 data, no parity, 2 stop.
/U3
7 data, odd parity, 1 stop.
/U4 7 data, odd parity, 2 stop.
/U5 7 data, even parity, 1 stop.
/U6
7 data, even parity, 2 stop.
/U7 8 data, no parity, 1 stop.
/U8 8 data, no parity, 2 stop.
/U9 8 data, odd parity, 1 stop.
/U10
8 data, odd parity, 2 stop.
/U11 8 data, even parity, 1 stop.
/U12 8 data, even parity, 2 stop.
%U User Flow Control
User flow control may be used when the rate at which data is
received from the line is greater than the rate at which the DTE can
process it.
%U0
User flow control disabled. Default.
%U1 XON/XOFF flow control enabled.
%U2 RTS flow control enabled.
%U3
XON/XOFF and RTS flow control enabled.
See Section 5.6.
X460-306851 Issue 1 8-25 Rev.0