Case Communications Mayze 24, Reference Manual, Page: 101 / 166

c) Will the local modem accept commands from the remote modem
to send the local modem's current active configuration to the
remote modem?
Command (a) (b) (c) Remarks
%E0
no no no Disabled
%E1 no no yes
%E2 no yes no
%E3 no yes yes
%E4
yes no no
%E5 yes no yes
%E6 yes yes no
%E7
yes yes yes Default
Care must be taken when changing the configuration of a remote
modem. For example, if the remote modem's active configuration is
%E7 and it is subsequently changed to %E4 you will have no
further configuration control over the remote modem.
A working example of this and the other remote configuration
commands is given in Section 5.8.
''E Security Control
This command is used to enable or disable the security features of
your modem.
''E0 Security disabled. Default.
''E1 Security level 1 enabled.
''E2
Security level 2 enabled (for rack card only).
If security is enabled, you need to use commands
''W
and
''Z
. See
also Section 5.9.
–E
Error Correction Format
This command is used to select the format of error correction that
your modem will accept or work to when in V.22bis or V.22 modes.
It is used in conjunction with the
%C command for selecting the
MNP class.
X460-306851 Issue 1 8-9 Rev.0