Heat Manager Pro User Manual V1.5 Page 25
2.6
A
UTO HOLD SETTINGS
The auto hold can be changed in both running and stopped mode.
The auto hold, will put the programmer in hold status (not increasing/decreasing
setvalue) when the programmer itself, or one of its slave(s), detects a deviation
between setvalue and measured value that exceeds an adjustable limit.
You can enter the allowed deviation between the setvalue and measured value in the tempera-
ture difference field.
[USED]
Enable the auto hold function
[UNUSED]
Disable the auto hold function
[BACK]
Return to the previous screen. Only after pressing the back button
the settings in the control modules will be written.
