Cascade Sciences CVO-2-HT, Installation And Operation Manual

Page: 43 / 72

43 | P a g e
cascadesciences.com | Tel. 503 847-9047
OPERATION
S
ETTING THE
C
ONSTANT
T
EMPERATURE
S
ET
P
OINT
H
EATING
P
ROFILES
Please see the Programming Guide – EZ-Zone Heating Profiles document for instructions on how to
program automated heating recipe profiles. The guide comes included with the oven and provides
illustrated explanations for all major heating profile functions and programming steps.
Pushing EZ1 launches heating Profile 1. Pushing EZ1 again while running aborts Profile 1.
Pushing EZ2 launches heating Profile 2 (Step 11). Pushing EZ2 again while running aborts Profile 2.
1.
Adjust the constant temperature Set Point on the Home Page
Adjust
•
Stay 10°C below the high limit
set point.
Note
: Holding down an arrow
button will cause the
temperature to advance in
increments of ten (10).
2.
Release the Arrow buttons after adjusting the Set Point
•
There may be a brief pause as the oven controller
calculates the optimum power usage to achieve the
set point starting from the current oven chamber
temperature.
•
A small illuminated 2 near the bottom of the display
indicates the temperature controller is calling for
heat.
Oven Heating