Cascade Sciences CVO-10, Installation & Operation Manual

Page: 42 / 56

42 | P a g e
cascadesciences.com | Tel. 503 847-9047
OPERATION
H
EAT THE
O
VEN
After saving a setpoint, the oven is ready to begin heating.
To heat the oven:
1. Press the green Play button.
•
The play button will be replaced by a red Pause button.
•
The Heat icon on the lower left side of the display will blink on and off as the oven
powers the heating elements in PID algorithm-controlled pulses.
Oven heating to 160°F
Pausing or End Heating
Press the red Pause Button on the display screen to end heating in the oven chamber. Heating at the
same setpoint may be resumed by pressing the green Play Button.
End of Procedure