Music Server connections
Connect the network cable
1
If your matrix amplifier is controlled using
RS-232 (serial), then connect the 9-pin
serial cable from your music server to the
control port on your matrix amplifier
2
Connect analog 3.5 mm to RCA audio
cables from streams 1-3 to your matrix
amplifier
3
If you are using Stream 8 (Digital Output)
you will need to provide your own cable
5
Connect the power cable
6
Need Help? Email: [email protected] or Phone: 970.237.3140
1
Now follow the QuickStart Guide for your
matrix amplifier to connect your music
server with your matrix amplifier
7
QuickStart Guide
CasaTunes CT-8 Music Server
Use this guide to quickly setup and configure your
CasaTunes music server by following these steps:
Unpack and verify system contents
Connect the music server power, network,
control and audio cables
Use the CasaSetup browser application to
configure your system
1.
2.
3.
Use this guide in conjunction with the QuickStart
Guide for your matrix amplifier to setup your
system
Connect analog streams 4-7 to your matrix
amplifier
4
1 x CT-8 CasaTunes music server
1 x Power cable
1 x Network cable
1 x 9-pin Male/Female Serial cable*
7 x 3.5 mm stereo to RCA audio cables
1 x Rack mount kit
4 x Anti-vibration bottom rubber feet
What's in the box?
*Replaced with an extra network cable when server is
shipped with a CT-5X4MA or CT-12X8MA matrix amplifier