
43
42
Specifications
Console Display:
340mm x 110mm
Acrylic touch screen:
Distance | Calories | Steps | Mode | Time | Speed | Pulse | pre-
set Programme | Body fat measurement
Features:
Foldable | Bluetooth music system | HD Audio speakers | one touch
speed | customise programme setting | fashionable design | L-Fit
workout handle | mobile phone charger | smart device holder |
emergency protection system
Motor:
1.0 CHP-motor - smooth, powerful and quiet operation
Voltage:
220-240 V 50/60Hz
Speed range:
1.0 - 12 km/h
Body fat measurement:
Yes
Running surface:
120cm x 42cm
Joint protective technology:
iCS (intelligent cushioning system) Tech.
Base frame:
MDF running deck
Product dimension (folded):
163cm(L) x 65cm(W) x 46cm(H)
Product dimension (normal):
163cm(L) x 65cm(W) x 133cm(H)
Packing mass:
170cm(L) x 73cm(W) x 47cm(H)
Weight:
N.W.:
53kg
B.W.:
58kg
Maximum user weight:
100kg
Certificates:
SPECIFICA
TIONS
1. CLEANING
After each exercise, ensure that the unit is wiped down and any sweat is removed from the unit.
The treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or
solvents. Be careful not to get excessive moisture on the display panel as this might damage the
unit and create an electrical hazard.Please keep the treadmill, especially the computer console,
out of direct sunlight to prevent damage to the screen.
2. STORAGE
Store the treadmill in a clean and dry indoor environment. Never leave or use the unit outdoors.
Ensure the master power switch is off and the power cord is un-plugged from wall outlet.
CLEANING AND MAINTENANCE | TROUBLESHOOTING
Cleaning and Maintenance
Troubleshooting
Problem
Causes
Corrections
Treadmill will not
start.
• Treadmill not plugged in.
• Safety Key is not correctly
installed.
• Circuit breaker has been tripped.
•
Plug the power cord into a
wall outlet.
•
Reinstall the Safety Key.
•
Reset the circuit breaker,
or call an electrician to
replace the circuit breaker.
Belt slips.
• Belt not tight enough.
•
Adjust belt tension.
Belt hesitates when
stepped on.
• Not enough lubrication applied
onto the running deck.
• Belt is too tight.
•
Apply lubricant.
•
Adjust belt tension.
Belt is not centred.
• Running belt tension not even
across the rear roller.
•
Centre the belt.
Summary of Contents for POWERWALKER
Page 1: ... relaxmyway POWERWALKER ...
Page 57: ......