13
Default: 4 CH split screen.
NOTE:
System is expandable to 8 CH, go to section 7.1 to set 8 CH view.
•
Single Channel View.
Double click the center of the quadrant to enter Single Channel View mode.
Under Signal Channel Mode, double left click the screen to exit then back to Quad Mode.
•
Auto Switch.
Move the mouse over the bottom of the display, selected the Auto Switch Icon and click
the icon to turn it to blue, NVR will switch each channel automatically in full screen display.
5.2.1 Live View Screen
1
Date & Time
Displays the date & time
2
PIR Working Indicator Displays when motion is detected by PIR
3
Recording Indicator
When this icon displays, it indicates that
recording is in progress.
4
Signal Strength
Shows how strong the camera's signal is.
Signal ranges from 4 bars down to 0 bars (out
of range).
5
Channel
Displays the camera number
