BALANCED OPERATION
The pin assignments of ALL the XLR-type male analog outputs, the XLR-type male digital output and XLR-type female digital
inputs are:
Pin 1: Signal ground
Pin 2: (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Refer to your amplifier's operating manual to verify that the XLR pin assignments of its input connectors correspond to the
DMS-800PV. If they are different, wire the XLR cable so that the appropriate XLR output pin connects to the equivalent XLR
input pin.
Pin 1: Signal ground
Pin 2: (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Refer to your digital input source signal player or other digital source's operating manual to verify that the XLR pin
assignments of its input connectors correspond to the DMS-800PV. If they are different, wire the XLR cable so that the
appropriate input pin connects to the equivalent input pin.
Pin 1: Signal ground
Pin 2: (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Refer to your digital source's operating manual to verify that the XLR pin assignments of its input connectors correspond to
the DMS-800PV. If they are different, wire the XLR cable so that the appropriate output pin connects to the equivalent
output pin.
PLEASE NOTE:
The DMS-800PV XLR sockets do NOT have a push-tab release.
However, you can use any standard XLR
cable with no issues.
65
