background image

 

1

 

XD88 Operation Manual 

 

 

 

The XD88 

Extreme Drive

 is designed to provide incredible flexibility, sonic excellence 

and intuitive controls for loudspeaker and EQ management. The XD™ software with its 
USB PC connectivity offers total control of your system with all the processing flexibility 
necessary for both installation and live use.  The XD88 is the next generation tool for 
sound processing that is needed between the mixer and power amp.   
 
Eight analog inputs and outputs make the XD88 one of the most powerful management 
tools on the market today. The flexible matrix routing allows any of the 8 inputs to be 
assigned to any of the 8 outputs, plus any multi-channel combination. As a primary 
loudspeaker management system, the XD88 can control systems from 8 mono full-range 
channels to stereo 4-way and everything in between. Other useful features include: 30 
Band Graphic equalizers on each input with 60 instant access buttons for up/down of 
each fader band. Each output has 4 parametric EQ’s, high and low crossover filters 
(Bessel, Butterworth, Linkwitz-Riley, 6-48dB/oct.), limiters with Threshold and Release, 
speaker delays up to 456ms (500 feet) on each output, and a RTA real time analyzer with 
a pink noise generator. 
 
The XD88 provides a large 64x240 graphic display for easy programming. For remote 
setting, use the easy to use USB PC interface – go to carvin.com/XD88 for the online 
demonstration. Large memory capacity has enough storage to contain up to sixteen 
complete 8x8 configurations or unlimited configurations on your PC allowing you to 
keep settings for multiple loudspeakers, multi-room installs and line-arrays. Processing 
offers extremely low latency, low noise with full 20-20Khz bandwidth from premium 24 
BIT AD and DA converters. 
 
The XD88 offers all the serious tools needed for a comprehensive loudspeaker 
management system. Combined with 8 inputs/8 outputs, first-rate components, high order 
AD DA converters, easy to use interface and a price that everyone can afford, the XD is a 
product that everyone would dream of having in their rack. 

Summary of Contents for XDrive XD88


















Reviews: