background image

4

27

110-0001-04EN

While driving

4.6 

Child seats

Risk of injury with resulting in death!

If a baby carrier is placed on the passenger seat facing away from the direc-

tion of travel with active airbags, the child may suffer fatal injuries regardless 

of the severity of the impact.

 

Always transport small children in their own child seat on the second row 

of seats!

If it is necessary to transport the small child in a baby carrier on the pas-

senger seat:

 

– push the passenger seat back as far as it will go in order to avoid the 

baby carrier form making contact with the dashboard!

 

– deactivate the front airbag and sidebag on the passenger side via the 

setup menu!

 

– check that the airbags are deactivated on the illuminated LED of the 

button on the dashboard!

4.6.1 

Universal child seat

Group

Seats

Passenger seat

Back row of seats

L

M

0

up to 10 kg

U*

U

U

0+

up to 13 kg

U*

U

U

1

9-18 kg

U

U

U

2

15-25 kg

U

U

U

3

22-36 kg

U

U

U

M:

Middle (if necessary, remove the upholstery for the correct installation of the restraint system)

L:

Left side (if necessary, remove the upholstery for the correct installation of the restraint sys

-

tem)

U:

Suitable for universal restraint systems that can be secured using the seat belt of an adult, 

and have been approved for this age group.

*:

See danger notes above the table.

Tab. 2 

Child seat fastening, universal child seat

 

 Further details for using the child seats can be found in the instructions of 

the vehicle manufacturer in this vehicle.

Summary of Contents for Malibu 540 2014









































































































































Reviews: