Cartoni Canon DIGISUPER XJ27X6.5B, Usage And Maintenance Manual

Page: 29 / 31

Remote System
Usage and maintenance
User Manual
28 / 30 Rev. 01/11/2021
Annex D: Devices priority
In case more devices with same functionality are connected together, only the device with the highest
priority is taken into consideration. Refer to this table to know exactly what device has the precedence.
Axis 1st choice 2nd choice 3rd choice
Pan, Tilt e-Cube Hand wheels Joystick
Zoom Zoom handle Joystick
Focus Focus handle
Table 31: Input devices priority, highest priority in on the left side. If the device is not found the system will scan for the next device
on the right.
The Lens controller for desktop is recognized as both Zoom and Focus handle.
Equivalent of the input priorities there is also a priority respected when digital lens and motors are
connected together: the external motors take the precedence over the internal lens servo motors.
Always
put the lens on manual when using external motors (See Figure 4).
Annex E: Product codes
The product codes reported in Table 30 are to be considered valid at the revision date of this document
(reported at the bottom right of each page). Values reported in this table are subject to change without
advise.
Product Code Description
A307 Focus remote control handle
A308 Zoom/Focus control module
A311 3-axis Joystick
A312 Handwheel
A313 Tally cable for external monitor
A322 Control console Pan, Tilt, Zoom, Focus
A333 Cable data/power 05 meters
A338 Bus Extender
A339 Cable data/power 50 meters
A340 Cable data/power 15 meters
A342 Cable data/power 01 meters
A343 Cable data/power 25 meters
A344 Fisher terminator
A345 Power supply 320W with cables
A346 Digital cable Canon HiRose
A347 Digital cable Fujinon HiRose
A351 Encoder cable Lemo 7 pin
A357 Emergency push button
A358 Digital cable Fujinon DB9
A361 Cable data/power 75 meters
A362 Conversion cable Zoom Fujinon Tajimi 8 pins
A363 Conversion cable Zoom Canon Tajimi 8 pins