www.cartell.com
717-532-0033
The CT-A1 Sounder is an indoor sounder that installs in a single-gang electric box. Works
with DriveGuard and DriveGuard Ultra systems (which use CT-2B and CF-2C control units
respectively, see pages 8 & 9).
CT-A1 Indoor Sounder
Three buttons on plate interact with lights and sensor when used with the DriveGuard Ultra (CF-2C):
ON
Turns lights on, putting them on timer
RESET
Turns lights off if they have not timed out
EXIT
Turns sensor probe off so car can pass by and not trip the system
Note: these three buttons are non-functional when used with the DriveGuard system
●
Full function with added features
●
Mounts in single-gang elec. box
●
Triple zone allows multiple monitoring
●
Decorative cover hides screws
●
Steady, fast-pulse, slow-pulse tones
●
Screw terminal hook up
●
Volume control with muting
●
Includes set of screws
This is a weather-proof sounder with a piezo-type Mallory Sonalert® for mounting in an
outdoor single gang electric box. It is excellent for areas such as pools, greenhouses, barns,
etc. Length of tone can be adjusted; manual volume control.
CT-11 Outdoor Sounder
●
Weather-proof for outdoors
●
90 dB with manual volume control
●
Mounts in single-gang elec. box
●
Screw terminal hook up
●
Pulsating tone • Includes gasket seal
and screws
●
Manual volume control
●
Be alerted anywhere on the property
This is a universal sounder that has a piezo-type Mallory Sonalert® audible signal device.
It is suitable for any security alarm panel, home automation panel, etc. Requires just two
wires: power positive and power negative. It has volume control; may be muted.
AA-1 Alarm Alert
Technical Specifications
CT-A1 CT-11 AA-1
Req. Power
10 - 20 VDC
10 - 20 VDC
10 - 20 VDC
Alarm Current
20 mA max.
25 mA max.
20 mA max
Temp. Range
0° F. - 140° F.
0° F. - 140° F.
0° F. - 140° F.
Dimensions
4½” x 3” x 1”
4½” x 3” x 1”
4½” x 3” x 1”
Weight
1 lb.
1 lb.
1 lb.
Max. Volume
70 dB
90 dB
70 dB
DRIVEGUARD
SOUNDERS
