15
JAN 2021
3.2.3
By a configuration file in bootloader mode
You can identify your TCM4 is in bootloader mode when the blue LED is on and not blinking.
If you wish to switch from
“
application mode
”
to
“boot
loader mode
”
, you need to enter the command
"
gobootload
" in a serial terminal like Putty, see above.
Once your TCM4 is in bootloader mode, you can read/write the parameters of TCM4 by using a
configuration file.
•
As soon as TCM4 is in bootloader mode, it is mounted to the host computer and it behaves like
a USB key
with the name “
TCM4 BOOT
”.
