6
Step 6
Assemble the SCORE ROD, SCORE
BEADS & SCORE END PIECES (item
#21) to the top on the end panel by
centering the scorer over the holes in
the GOALIE COVER PLATE (item #5)
and fasten with (2) screws (provided in
accessory box) to the top of the end panel.
No pre-drilling is necessary.
Step 7
Screw in the (8) DOUBLE HEADED
SCREWS (item #3) into the bottom holes
of each side & end. (The drink holder
corners have slots that will slide over
these screws.) Attach (4) DRINK HOLDER
CORNERS (item #20) to each corner of
the cabinet by sliding them down over the
top edge of the cabinet. Attach the drink
holder corners by carefully engaging the
(2) double headed screws on the corners
of the cabinet with the slots on the inside
of the corners. Drink holder corners should
fit snugly.
Player and Rod Assembly Tips:
IMPORTANT: RODS MUST BE CLEANED PRIOR TO ASSEMBLY! WIPE DOWN
THE RODS WITH A CLEAN SOFT CLOTH TO REMOVE ANY DUST OR EXCESS
LUBRICANT.
THE HEXAGON OPENING IS THE “BACK” OF THE PLAYER. MAKE CERTAIN
THAT ALL PLAYERS FACE THE OPPOSING GOAL. SEE FIG. 6
YOU MAY SET UP YOUR GOALIES IN ONE OF TWO WAYS.
FOLLOW THE APPROPRIATE INSTRUCTIONS PER YOUR PREFERENCE.
Summary of Contents for Foosball 522.03
Page 10: ...9 Single Goalie Setup ...
Page 11: ...10 3 Man Goalie Setup ...
