![background image](http://html.mh-extra.com/html/carrier/zs/zs_application-manual_2560236007.webp)
Introduction
ZS Sensor
CARRIER CORPORATION ©2020
Applications Guide
All rights reserved
3
Remote Sensor:
Temperature sensor
ZS Sensors communicate with the HVAC system through the Rnet.
A ZS zone sensor's functionality is determined by:
•
The ZS sensor model (Standard, Plus, Pro, Pro-F)
•
The sensor's sensing capabilities (temperature, humidity, CO
2
, VOC, or motion)
•
The control program that runs the associated equipment
REQUIREMENTS
•
All ZS Sensors except the ZS Pro with motion sensor require:
•
The i-Vu® v6.0 or later application
•
v6.0 driver (drv_xxxxxx_6-00-082 or later). Check
Carrier Control Systems Support Site
https://accounts.ivusystems.com/
for the latest driver.
•
The ZS Pro with motion sensor requires:
•
The i-Vu® v6.5 or later application
•
v6-00a or later controller driver
•
A BSVI microblock in the control program (even if it is not used)
This document
This document describes how to create control programs for ZS sensors in the Snap application. To use this guide,
you need a working knowledge of control programs and the Snap application.
See the
ZS Sensors Installation Guide
to mount, wire, and communicate with the sensors.
See the
ZS Sensor User Guide
to use the sensors.
Summary of Contents for ZS
Page 4: ......
Page 48: ......
Page 49: ...CARRIER CORPORATION 2020 Catalog No 11 808 504 01 6 11 2020 ...