![background image](http://html.mh-extra.com/html/carrier/zs/zs_application-manual_2560236017.webp)
Creating Snap control programs for ZS Sensors
ZS Sensor
CARRIER CORPORATION ©2020
Applications Guide
All rights reserved
13
Step 5: Add a BACnet Time Clock microblock
The BACnet Time Clock microblock enables the ZS Sensor's override function and controls its green Occupied LED.
From the
Control
microblock menu, add a
BACnet Time Clock with TLO and Override Status
microblock
to determine how the user can interact with your schedule through the ZS Sensor. Enter the following information
in the Property Editor.
Enable Rnet
Check to allow this microblock to communicate its value(s) to and from a ZS
sensor.
Allow 'Continuous' Override
Check to allow a user to force a zone into an occupied state for an indefinite
amount of time. The override remains in effect until the schedule transitions
to occupied or until a user manually clears it by pressing the sensor's
button twice.
Allow Force Unoccupied
Check to allow a user to save energy by forcing the zone into an unoccupied
state. To force unoccupied, a user holds a ZS sensor's
button for at least 3
seconds. This override state remains in effect until the schedule transitions to
unoccupied or until a user presses the sensor's
button.
Force Unoccupied without
Delay
Check to allow a user to force a zone to unoccupied immediately instead of
the normal 3-second delay.
NOTE
This feature is unavailable if
Allow TLO Set During Occupied
is
checked.
Allow TLO Set During Occupied
Check to allow a user to activate a timed local override while the zone is
scheduled occupied. This allows a user to extend the zone's occupied time
without the zone having to go unoccupied first.
NOTE
This feature is unavailable if
Force Unoccupied without Delay
is
checked.
Timed Local Override
Increment
Minutes the microblock adds to the zone's occupied time for each press of the
zone's local override button or switch.
Maximum Duration
Maximum value (up to 960 minutes) the microblock outputs regardless of
additional pulses from the controller's input.
Optional
tab -
Allow for External
Scheduling
See External Scheduling.
During an override, the bottom of the screen will show and the minutes remaining in the override.
Summary of Contents for ZS
Page 4: ......
Page 48: ......
Page 49: ...CARRIER CORPORATION 2020 Catalog No 11 808 504 01 6 11 2020 ...