Carrier UC Open XP, Installation And Startup Manual, Page: 33 / 44

UC Open XP/UC Open XP IO 29
These wire lists represent all the possible points for this application. The points that are actually used in your
application depend on the equipment options you select in ApplicationBuilder.
UC Open XP wire list
UC Open XP Universal Controller
Open System Network
Project Name:
Location:
Controller:
Network Number:
Aux
MAC Address:
power
1 5V Jumper right 2
1 24V
Jumper left 2
2 GND
Point/
Cable#
Inputs
(+)
(G) Input
Type
Jumper
Position
of Pins
I/O Sensor
code
Equipment
Name
Point
Name
3 5 0-10 Upper UI-1
3 5 Pulse/Other Middle
3 5 4-20 Lower
4 5 0-10 Upper UI-2
4 5 Pulse/Other Middle
4 5 4-20 Lower
6 8 0-10 Upper UI-3
6 8 Other Middle
6 8 4-20 Lower
7 8 0-10 Upper UI-4
7 8 Other Middle
7 8 4-20 Lower
9 11 0-10 Upper UI-5
9 11 Other Middle
9 11 4-20 Lower
10 11 0-10 Upper UI-6
10 11 Other Middle
10 11 4-20 Lower
12 14 0-10 Upper UI-7
12 14 Other Middle
12 14 4-20 Lower
13 14 0-10 Upper UI-8
13 14 Other Middle
13 14 4-20 Lower
Appendix A: UC Open XP and UC Open XP IO wire lists