Adjusting the TV-VAVB3-E2 driver properties
TruVu™ VAVB3
-E2
CARRIER CORPORATION ©2022
Installation and Start-up Guide
All rights reserved
81
Enable IP configuration
changeover
Only for custom static IP addressing
—
Select this field to remotely change the
controller's
IP Address
,
Subnet Mask
, and
Default Gateway Address
.
Type the new addresses and the
UDP Port
that your server is using to
communicate to all controllers.
In the
Changeover timeout
field, enter:
•
A specific length of time for the controller to attempt to communicate with the
Next Default Gateway Address
. The controller will use the
Next
setting as
soon as the controller can communicate with the
Next Default Gateway
Address
, or when the timeout occurs, whichever comes first.
•
0:00
to have the controller use the
Next
settings as soon as the controller
can communicate with the
Next Default Gateway Address
.
See "To remotely change a controller's IP address" in i-Vu® Help for more
information on using this feature.
BACnet Firewall
If this IP controller is accessible from the Internet, you can increase security by enabling its BACnet firewall. When
enabled, this feature prevents the controller from responding to BACnet messages from unidentified sources and
allows communication only with IP addresses that you define. These can be all private IP addresses and/or a list
of IP addresses. Follow the instructions in the i-Vu® interface to set up the BACnet firewall.
