To set up the driver
Zone Ctrl II and
VAV Zone II Secondary Duct Installation and Start-up Guide
CARRIER CORPORATION ©2019
Error! No text of specified style in document.
35
All rights reserved
After discovering your Zone Ctrl II, you may want to change the driver's properties in the i-Vu® interface to suit
your application.
1
On the i-Vu® navigation
tree, right-click the Zone Ctrl II.
2
Select
Driver Properties
and make changes if needed.
Driver
On the
Driver
>
Update
tab, you can get a Module Status and add, update, or delete the driver and the
touchscreen file.
1
To update the driver, do one of the following:
If the driver is...
In the
Driver Version
drop-down list
Select the driver and click
Apply
or
Accept
..
Not in the
Control Program
drop-
down list
a. Click
Add
.
b. Browse to select the driver.
c. Click
Open
.
d. Click
Continue
.
e. Click
Apply
or
Accept
.
2
To change, delete, or upload a screen file, click
Add
under
Screen File
and browse to your touchscreen file or
select from the drop-down list..
3
Click
Continue
. When message appears
File added successfully
, click
Close
.
4
Click
Close
again.
5
Click the
Download
button.
To set up the driver
