Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No. 04-53620023-01
Printed in U.S.A.
Form 62X-2SI
Pg 1
7-18
Replaces: New
Installation Instructions
Part Number CRRFCURBX****1
SAFETY CONSIDERATIONS
Installation and servicing of air-conditioning equipment
can be hazardous due to system pressure and electrical
components. Only trained and qualified service personnel
should install, repair, or service air-conditioning equipment.
Untrained personnel can perform basic maintenance func-
tions of cleaning coils and filters and replacing filters. All
other operations should be performed by trained service per-
sonnel. When working on air-conditioning equipment, ob-
serve precautions in the literature, tags and labels attached to
the unit, and other safety precautions that may apply.
Follow all safety codes, including ANSI (American Na-
tional Standards Institute) Z223.1. Wear safety glasses and
work gloves. Use quenching cloth for unbrazing operations.
Have fire extinguisher available for all brazing operations.
PACKAGE CONTENTS
Contents of packages will vary, but each curb will include
all curb frame, dividers, supports and hardware to completely
assemble curb. See attached curb assembly drawing for curb
details. For package usage see Table 1.
INSTALLATION
These instructions show a typical installation for 62X
curbs. A separate assembly drawing is provided with each
curb shipped. Use this drawing for job specific curb dimen-
sions and construction.
There are two different types of roof curbs in the 62X se-
ries:
•
The first is the standard curb without a separate equip-
ment support. These curbs are of varying sizes (see pack-
age usage) and have different types, sizes and quantities
of internal supports. Figures 1 and 2 show 2 different
examples of these curbs. Figure 1 has a 4 piece frame, 2
sides, and 2 ends. Figure 2 is a longer curb with 4 sides
and 2 ends.
These curbs should be assembled with provided corner
brackets and hardware as shown in Fig. 1 and 2. The lon-
ger curbs (Fig. 2) have a splice in the length of the curb
sides. Install splice plate as shown in Fig. 2.
Install the supports in curb as shown on the drawing pro-
vided with the curb (quantity and location of the supports
vary by curb model).
•
The second type of curb is the same as the first except it
also includes an equipment support. The assembly of the
curb itself will be the same as the first. The equipment
support is shipped assembled. Figure 3 shows a typical
curb with equipment support. The exact location of the
support is critical and is noted in 62X Installation
Instructions. The equipment support is known as a
sleeper rail and will support the condensing section of
the unit.
NOTE: For detailed information on the curb dimensions, refer to
the latest edition of Carrier's Dedicated Outdoor Air Systems
builder.
1. Before installing roof curb, ensure that curb is located so
that proper clearances are maintained. Ensure that roof
structural integrity is capable of supporting weight of
rooftop unit. Refer to structural unit nameplate or unit
installation instructions for correct clearances.
2. Cut hole in roof for duct openings per instructions pro-
vided with 62X unit.
3. Frame the roof opening to provide proper and adequate
structural support.
WARNING
Electrical shock can cause personal injury and death. Shut
off all power to this equipment during installation. There
may be more than one disconnect switch. Tag all discon-
nect switch. Tag all disconnect locations to alert others not
to restore power until work is completed.
WARNING
PERSONAL INJURY AND EQUIPMENT DAMAGE
HAZARD
Failure to follow this warning could result in personal
injury and/or damage to equipment.
Do not leave roof opening uncovered. If installation
is not completed immediately after roof opening is cut
and framed, provide an adequate temporary cover for the
roof opening.
62X 03-35
Dedicated Vertical or Horizontal Outdoor Air Unit
with Optional Energy Conservation Wheel
Roof Curb Accessory
