14
Fig. 10 — TB10 Locations and Connections (STD SCCR Only)
Fig. 11 — High SCCR Single Point Box Assembly — Rain Shield
HEATER
363A00
Rain Shield
Terminal Block
Access Hole
Attach Rain Shield
With (3) Screws
Thru Back Of SPB Box
Fuse Block
Access Cover
Add Seal Strip To Assembly
Prior To Installing Into Unit
Wire Tie or Grommet
For ODF, Crankcase
Heater or Other Wires
NOTE: Due to length, some component wiring may need to be disconnected and rewired throught the rain shield grommet.
