SEE YOUR HOME IN A
WHOLE NEW WAY.
CÔR™ INDOOR WI-FI
®
CAMERA
1080P FULL HD
QUICK-START GUIDE
ADDITIONAL SUPPORT
Questions/Comments?
We want to hear from you!
Call us: 844-692-6746 or
(844) MY-COR-HOME
Visit
mycorhome.com.
1
3
2
RECORDING ON MEMORY CARD
Installing the Memory Card
Flip the memory card slot cover clockwise to open it.
(See image on left.)
Insert a microSD card into the slot until it clicks.
(See image on right.)
Replace the cover.
©2018 Côr™ Home Automation.
Wi-Fi
® is a registered trademark of the Wi-Fi Alliance Corporation.
Apple and the Apple logo are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store is a service
mark of Apple Inc. Google Play is a trademark of Google Inc.
Android is a trademark of Google Inc. Other trademarks and logos
mentioned are the properties of their respective owners.
CTSTI-WH
IM-CTSTI-WH-01
IR Light
Auto light source for dark environment.
The camera video has two modes: color
(for daylight recording) and black and white
with IR illuminator (for night conditions).
LED Indicator
Blinking Red and Blue: The camera is on;
you can configure the Wi-Fi
®
connection.
Steady Blue: The camera is being connected
and operated by user(s).
Slow Blue Flicker: The camera is running properly.
Steady Red: The camera is starting up.
Slow Red Flicker: The Wi-Fi connection has failed.
Fast Red Flicker: MicroSD card error.
Memory Card Slot
For microSD card (not included with this product).
Recommended compatibility: Class 10, maximum
space 128GB. After inserting the microSD card, you
can record the event inside the camera. You need to
initialize it on the Côr
™
Smart Home app.
RESET
Hold down the RESET button for 10 seconds when
the camera is running. The camera will restart and
reset all camera settings to default.
Power Supply
5V 10%
+-
Côr Smart Home app reads “The camera is offline” or
“The device is not registered” when camera is added.
Make sure your router is connected to the Internet
and you have a good Wi-Fi
®
signal.
The mobile device cannot receive notification
prompts when the camera is online.
Make sure the Côr Smart Home app is running on
your mobile device, Motion Detection is enabled and
Notifications are turned on.
Android users should make sure the app is running
in the background.
iOS users should enable the message push function
in “Settings > Notification.”
If alarm prompts still fail to appear, hold down the RESET
button for 10 seconds to restore the camera settings to
factory default. (Note: you will need to set up Wi-Fi again.)
Live view or playback failed.
Make sure your network is well-connected. Viewing live
video needs a good bandwidth. You can refresh the video
or change network and try again.
How to connect to a new Wi-Fi network.
Hold down the RESET button on the camera for
10 seconds to reset and restart the camera.
Reconnect the Wi-Fi by following the in-app steps.
Q
Q
Q
Q
A
A
A
A
TROUBLESHOOTING
